Auscultatory Blood Pressure Measurement Without Mercury |
The UM-101 inherits the appearance of conventional mercury
columns so there is no confusion even if you are using the device for the
first time. The only difference is that the user has to press the ON/OFF
button to activate the unit before commencing BP measurement. No liquid
is used in this device and therefore handling it is easier than its
counterparts. The problem of a slow mercury response, due to clogging of
the filter in the glass tube, does not exist because the UM-101 effortlessly
delivers quick and easy-to-read digital results. |
Pressure Level Marker for Useful Reminders |
Thanks to digital technology, the UM-101 has an extra button other than the ON/OFF button. By pressing this button (MARK), you can easily
put markers on the digital bar to memorize the measured pressure. Up to
five markers can be shown within one reading. The pressure level,systolic
value and diastolic value are examples of ideal points to highlight and
refer to yourself or show to someone else. |
Digital Read Out for Pulse Rate |
The UM-101 is equipped with a small numerical display at the base
of the digital column. This numerical display shows the pressure itself
while it is increasing or decreasing. When a measurement is completed
(below 20mmHg). the patient’s pulse rate is displayed automatically. The
time-saving function is very practical because the patient’s blood pressure
and pulse rate are measured simultaneously. |
Adjustable Display Column for Easier Analysis of Results |
Unlike a mercury column, you can adjust the UM-101 digital column
to your prefered position by choosing from 4 different angles (ranging from
0 to 90 degrees). There is no need for you to twist yur head or lean over to
view your readings! You can even put the UM-101 on a patient’s bed and
take an accurate measurement after adjusting the column to your selected
angle. (The device does not have to be placed on a flat surface.) |